How to install Android 4.4.2 Kitkat in your Computer with bootable USB Flash Drive.

STEP-1

First you have to download Android-x86-4.4.2.iso. Click Here

 

STEP-2

Download Unetbootin. Click Here

Open Downloaded Unetbootin

>Select-     Diskimage

>Browse -  Android-x86-4.4.2.iso and Select this image.

>Select -    USB flash drive and Drives path Letter

>OK

Now your USB flash drive is ready for boot.

STEP-3

Now go to My Computer> Right click- Manage>Disk management

Create a disk partition at least 10GB

STEP-4

Now restart your computer.

>go to boot menu

>boot from USB Flash drive.

>Install android x86 to hard disk

>Select- Partition

>Do not format

>Install Boot loader

> Use memory at least 512MB

STEP-5

>Restart your Computer

>Select- Android

>Configure Android

ENJOY....

NOTE: Some step may skipped here, Watch this video for clear concept.

How to Increase Computer's Internet Speed by 25% : A Simple & Genuine Trick

How to Enable / Disable Write Protection From a USB Flash Drive /Memory Chip / pen drive

 

Insert Your USB Flash drive or Memory Chip

Open Command Prompt ----( START>Type-RUN>Open-RUN>Type-CMD>OK)

Type- "diskpart"

>ENTER

Type- "list volume"

>ENTER

Type- "select volume #" ( # is your volume number which you want to enable/disable write protection)

Type-  "attributes disk set readonly (for enable write protection)

Type-  "attributes disk clear readonly (for disable write protection)

ENJOY....

NOTE: Watch this Video for better concept.

How to Connect two Computer in a Local Area Network ( LAN ) using Cat5 Cable and RJ45 Ethernet port.

Connect both computer with a CAT5 cable through RJ45 Ethernet Port

Power ON both Computer

COMPUTER # 1 , PART- 1

Open - Network and Sharing Centre

>Local area Connection

>Properties

>Internet Protocol version 4 (TCV/IPv4)

>Properties

>Use the Following IP Address

IP address - 192.168.2.1 (If already used by other devices, then use another IP)

Subnet mask- 255.255.255.0 (After enter IP address press TAB button , Subnet mask automatically comes)

>OK>CLOSE>CLOSE

COMPUTER # 2 , PART- 1

Open - Network and Sharing Centre

>Local area Connection

>Properties

>Internet Protocol version 4 (TCV/IPv4)

>Properties

>Use the Following IP Address

IP address - 192.168.2.2

Subnet mask- 255.255.255.0 (After enter IP address press TAB button , Subnet mask automatically comes)

>OK >CLOSE >CLOSE

COMPUTER # 1 , PART- 2

Go to MY Computer and Right click on a drive which you want to share

>Properties>Sharing(TAB)>Advance Sharing> CHECK- Share this folder>Permission

Choose permission

APPLY >OK >APPLY >OK >CLOSE

COMPUTER # 2 , PART- 2

Go to MY Computer and Right click on a drive which you want to share

>Properties>Sharing(TAB)>Advance Sharing> CHECK- Share this folder>Permission

Choose permission

APPLY >OK >APPLY >OK >CLOSE

COMPUTER # 1 , PART- 3

Open My computer>Network>Select PC> Browse for Shared folder.

COMPUTER # 2 , PART- 3

Open My computer>Network>Select PC> Browse for Shared folder

ENJOY SHARING.....

NOTE: Some step may skipped here, Watch this video for better concept.

How to Fix/ repair a corrupted USB flash pen drive occupied memory bu...

How to fix corrupted flash drive

Sometimes your flash drive shows " No Folder or no files inside" although it occupied some space or memory. Due to bad removal of flash drive this type of problem occurred.
You should change attributes of that drive to fix this problem.

First go to RUN>CMD or direct CMD
Type-   attrib -h -r -s /s /d g:\*.*
Enter.. that's all.

Replace "g" with your drives path letter . If your flash drives path letter is "H" then type h:\*.*

Watch this video for clear concept.

ATTRIB Command:

ATTRIB:

"+"   Sets an attribute.

"-"   Clears an attributes.

R    Read only.

A    Archive.

S    System File.

H   Hide.

I    Not content Indexed file.

DRIVE, PATH & File Name:

/S  Current folder and all Subfolders.

/D  Folders as well.

/L   Symbolic Link versus the target of the Symbolic Link.

How to embed / Add Google Maps step by step on your Website, Webpage or ...